There are two pins. Very small package fits in any Jeep. It has a low minimum lift height, a decent max lift height, and if used at one corner at a time, it is pretty stable for the height it is able to achieve. If your exhaust is cut more round than ours or you have onboard air, you can lift your Jeep anywhere you need to. Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Nothing can fix the large footprint. Max pressure on the bag is 10 psi, and it took us 8 psi to get that CJ with the V-8 off the ground.
BubbaRope Gator-Jaw Soft Shackle
Method for Raising a Wheel out of a rut If one of your driving wheels falls in a deep hole, you can get out with a log and a chain. Place pin 2" below so any drop is not too great. If your pulling so hard on the handle that your almost off the ground then your hitting the 3 ton limit and that is where bent handles start to happen. When you don't have a winch, you have 2 options, use a second vehicle to pull you out or do some self recovery. Archived from the original on 28 December Always ensure you use the recommended electrical cable and that all connections are tight and completely rust and oxide free. Stretch Nylon Double Braid is the preferred choice for applications requiring high strength with excellent shock absorbing properties.
ARB 4×4 Accessories | Jack - ARB 4x4 Accessories
Oil is used since it is self lubricating and stable. When the plunger pulls back, it draws oil out of the reservoir through a suction check valve into the pump chamber. Retrieved 9 June Re-rig for a second lift with the point of the lever under the axle if possible.
Description: The bottom jaw snapped off The trusty high lift jack, has several uses, among them is a winch. This device comes in a few shapes and sizes - High Lift Jack, Jack-all, Jumbo Jack etc The basic operation is the same, the jack consists of a mechanism with a single fork sticking out one side and a long lever on the other, the mechanism climbs up and down a long vertical rack. The jack may be hydraulic or work by screw action.